Tube ice, cube ice tube ice plant, block ice plant, chilling plant, compressor spares Parts, air compressor, chilling compressor, ice, Brine chiller, water chiller, air Cooled chiller, cupid ice, Desiccant and refrigerated air dryer, air dyers, HOC, IH, HEATLESS, LOW PRESSURE AIR DRYER, PSA OXYGEN GAS GENRATOR. OXYGEN GAS, NITROGEN GAS, AMMONIA CRACKER, HYDOGEN GAS GENERATOR, desiccant& catalyst, psa nitrogen gas generator, psa nitrogen plant, activated alumina, activated carbon, alumina, molecular sieve, nickel catalyst, palladium catalyst, oxygen sensor, Oxygen gas, hydrogen gas, CO, CO2 GAS analyzer and sensor, HEAT exchanger, after Cooler, air compressor spares parts, air compressor and chilling compressor spares, compressor spare, air compressor, auto drain valve, piping contract.

 
Internally heated Air Dryer
















The Drying unit has 2-vessels filled with Activated Alumina or Molecular sieves desiccant. One vessel remains in drying cycle for 4 hours, while other vessel simultaneously regenerates at atmospheric pressure. Around 3% flow of dryer capacity is used as purge for regeneration. Electrical heaters are provided in a central finned Stainless steel pipe in both drying vessels. Heating cycle is for 2 hours and in this time hot purge air increases desiccant temperature to around 1000C. At this temperature regeneration is complete (due to dry air purge). Dew point achieved is around (-) 400 C. If still lower Dew point is required, air purging rate is slightly increased to 5% for (-) 600 C and to 7.5% for (-) 800 C Dew point.
Internally heated Air Dryer

Capacity: 100 nm3/hr to 2000nm3/hr

Dew point: (-) 60 to 800 C.