Tube ice, cube ice tube ice plant, block ice plant, chilling plant, compressor spares Parts, air compressor, chilling compressor, ice, Brine chiller, water chiller, air Cooled chiller, cupid ice, Desiccant and refrigerated air dryer, air dyers, HOC, IH, HEATLESS, LOW PRESSURE AIR DRYER, PSA OXYGEN GAS GENRATOR. OXYGEN GAS, NITROGEN GAS, AMMONIA CRACKER, HYDOGEN GAS GENERATOR, desiccant& catalyst, psa nitrogen gas generator, psa nitrogen plant, activated alumina, activated carbon, alumina, molecular sieve, nickel catalyst, palladium catalyst, oxygen sensor, Oxygen gas, hydrogen gas, CO, CO2 GAS analyzer and sensor, HEAT exchanger, after Cooler, air compressor spares parts, air compressor and chilling compressor spares, compressor spare, air compressor, auto drain valve, piping contract.

 
PSA NITROGEN GAS GENERATOR
















| ADVANTAGES | APPLICATIONS |
 
 
PSA NITROGEN GAS GENERATOR
Our nitrogen gas generator is based on P.S.A Technology and that is called “PRESSURE SWING ADSORPTION’’.


NITROGEN GAS GENERATION :-


The main ingredient of Nitrogen Plant is CMS (CARBON MOLECULER SIEVE) and CMS is having indefinite pores on the surface, which adsorb the molecules of Oxygen, Moisture and Unwanted gases from compressed air. Nitrogen gas, which is not adsorbed into the surface of CMS comes out from adsorbed tower and collects in the surge vessel.
 
CONTINUOUS NITROGEN GAS GENERATOR :-
 It consists of two-adsorber tower, which is filled with Carbon Molecular Sieves. The adsorber towers are interconnected with Change over Control valves controlled by sequence timer and its standard time cycle is (1 + 1) minute. After every one-minute time cycle adsorbed tower, automatically swings and Nitrogen gas is produced continuously.
 
Nitrogen Generator Models :-
PEE MODEL
This is very simple Model for producing the Commercial grade of Nitrogen with its Purity of 99% and very economical. This Model is suitable up to 99.9% Purity. We can also achieve 99.9999% Purity but for achieving this Purity the quantity of CMS and Compressed air will much higher. It means overall investment and running Cost will be higher. This Model is used for preserving the food, Purging and inertizing.
 
DX MODEL
This Model is used as  ‘High Purity Nitrogen plant’ wherein the purity level is 1-2 PPM. This type of Plant is used where Hydrogen contents are required. This plant is Commonly used for Heat treatment, Chemical and Electronics industries. 
 
COPPER – DX
This Model is used as ‘ Ultra Pure Nitrogen Plant’ and its Purity level is 1PPM (max). This is used where Nitrogen gas is required, free from Oxygen and Hydrogen. This Model is Commonly used in Optical cable, Electronic and Synthetic Fiber Industries.
 
Advantage Of P. S. A. Nitrogen Plant  :-
• P.S.A Plant is Reliable, Economical, Durable and user friendly.
• Fully Automatic – No special operator required.
• Low generation Cost – Pay Back period within one year.
• Self Contained unit and ready to install.
• Consistency of Purity and no hassles of Nitrogen Cylinder.
• Maintenance cost is very low.Minimum life of CMS is 10-12 year.
 
 
APPLICATION OF NIROGEN GAS
• Metallurgical Industry
• Synthetic & Fiber Industry
• Chemical Industries
• Food Packaging Industries
• Pharmaceutical Industry
• Optical industry Electronic Industry
 
Capacity :- 1Nm3/Hr to 1000 Nm3/Hr